Nautilus Std. Electrical - Datasheet

<50 lbs. Force Demate Force: Flexible Paddle - Other available on request ROV Handle Type: Nautilus Standard Electrical Connectors Cable End ROV Connector Half–
• Plug or Receptacle available
• Paddle Handle Standard
• 45° or 90° Termination Standard -
- other angles available on request1 Cycle Minimum with latch verificationPin-Ground>10 GW @1,000Vdc<0.1 WPin-Ground>10 GW @1,000Vdc3,000 psi25 Years<10 mW (Not measurable as an assembly)<0.1 W (<30 mW Typical)<6 lbs. Force per circuit-25°C - +60°C-2°C - +50°CConsult ODI for pressure differentials >3,000psiPressure compensated for full ocean depth.>1,0003.0 kVac - phase-to-phase1.8 kVac - phase-to-ground30 Amps per circuitPost Hydrostatic Bench Tests:-Insulation ResistanceMinimum Differential PressureMateability FunctionInsulation ResistanceCircuit Resistance

Table 2 - FAT StandardsContact Resistance:Design Life:Mating Force:Hydrostatic Test:-Circuit Resistance:Storage Temperature:Amperage Rating:Voltage Rating (per IEC 60502):Operating Depth:Operational Temperature:Mate/Demate Cycles:Alignment Key:Material:Number of Circuits:Single - Multiple keys available on requestTitanium CP Gr24,7,12 - Others available on requestROV Operable Type: The connector is designed to meet the specification shown in Table 1. Each deliverable connector is Factory Acceptance Tested (FAT) either individually, or as part of an assembly, as specified in Table 2. A Certificate of Conformance (C of C) is supplied with each connector or associated assembly. Upon request, a documentation package including as-built General Arrangement drawing, material traceability log and test results can be provided.Design Characteristics:Operational Characteristics:Physical Characteristics:Table 1 - Standard SpecificationsROV Wet-Mateable ConnectorsProduct Technical Specification –
Electrical Connector Nautilus Ô Series General Fixed Mount ROV Connector Half–
• Plug or Receptacle available
• Front or Rear Mount available
• Staight, 45° or 90° Rear Termination Available
Printout

OdiComFtr